Key products of plastic pipe extrusion production line---PE Pipe Extrusion Line

1200 mm Water/Gas Supply PE Pipe Extrusion Line produced by Fangli.

1.High Capacity,the main extruder 120*36 with motor power is 355 kW, the output is up to 1,400 kg/h.

2.Low energy consumption, average energy consumption per ton of production line is 280 kwh.

3.Quality Configuration,equipped with SIEMENS control system, WEG motor, Sunlung gear box, etc. famous brands, highly integrated, easily operated.

4.1200 mm large flux die head, has the effect of anti-sagging of domestic materials.

5.The color marking strippers should be outgoing within 3 m, and extruded qualified pipe fast.

6.Plug-on bushing & pins,easier changing and shorter down time.

7.High thickness and oval calibrated by multi ways, better roundness.

8.The tractor adopts servo control, with large traction force, suitable for large diameter thick wall pipe traction Haul-off adopts servo control, powerful pulling, suitable for large diameter thick wall pipe traction.

9.The winch adopts European structure to avoid inconsistency between winch speed and traction speed and disordered wire rope arrangement.

10.Chipless heavy load pipe cutting, whichcan achieve chip free cutting of 130mm wall thickness pipes.