Extrusion Line for Solid Wall Pipe Operation Precautions

Here are some things to note when operating extrusion line for solid wall pipe:

Safe operation: Ensure that all workers wear appropriate protective equipment, including hard hats, safety shoes, and protective glasses. Follow operating procedures and safety guidelines for machinery and equipment.

Equipment Inspection: Before operation, carefully inspect all parts of the extrusion line to ensure that the equipment is operating properly and that there are no loose parts or other damage.

Raw material preparation: Confirm that the raw materials used meet the requirements, and perform sufficient preprocessing, such as drying, mixing, etc., to ensure product quality.

Temperature control: During the extrusion process, control the temperature of the extruder to ensure that the raw materials can reach a suitable melting state to ensure the uniformity and stability of the product.

Mold selection: Select the appropriate mold based on the required pipe size and shape, and ensure the mold is adjusted to the correct position and clearance.

Extrusion speed and pressure control: Adjust the speed of the extruder and the pressure of the extrusion head to achieve the required extrusion speed and pressure to ensure product quality.

Cooling and solidification: After extrusion, use appropriate cooling equipment to cool the pipe and ensure sufficient solidification time to ensure product size and physical properties.

Quality control: Regular product quality inspections and tests, including appearance inspection, dimensional measurement and physical performance testing, to ensure that products meet standards and requirements.

Maintenance: Clean and maintain the extrusion production line regularly, and replace worn parts in a timely manner to ensure the normal operation of the equipment and extend its service life.