What devices are included in the structural wall tube extrusion production line?

The structural wall tube extrusion production line is usually composed of multiple key devices to achieve the extrusion, molding and subsequent processing of the structural wall tube. The following are the main devices included in the common structural wall tube extrusion production line:

Extruder: The extruder is the core equipment of the entire production line, which is used to heat, compress and extrude molten plastic or other materials to form continuous plastic extrudates. In the structural wall tube production line, a multi-layer extruder is usually required to achieve the extrusion of multi-layer structural wall tubes.

Die Head: The die head is a device used to form the extrudate into the required shape and size, which determines the shape and wall thickness of the tube. In the structural wall tube production line, the die head needs to be able to achieve multi-layer extrusion and have a complex structure to meet the design requirements of the wall tube.

Inner Layer Extruder: In the production of structural wall tubes, the inner layer extruder is used to extrude the inner layer material of the tube, which is usually used to provide structural support or other specific functions of the tube.

Outer Layer Extruder: The outer layer extruder is used to extrude the outer layer material of the pipe, which is usually used to protect the inner layer of the pipe or provide appearance decoration.

Water Cooling Tank: The cooling tank is used to cool the extruded pipe to solidify and stabilize its shape. In the structural wall pipe production line, the cooling tank usually needs to be able to cool the multi-layer pipe and have corresponding temperature control and regulation functions.

Haul-off Unit: The haul-off unit is used to continuously stretch the extruded pipe out of the extruder and maintain a certain stretching speed and stability. In the structural wall pipe production line, the haul-off unit needs to adapt to the stretching and traction of multi-layer pipes.

Cutting Machine: The cutting machine is used to cut the extruded pipe according to the set length to obtain the final pipe product. In the structural wall pipe production line, the cutting machine needs to be able to adapt to the cutting of multi-layer pipes and have precise cutting control.

Stacker: The stacker is used to collect and stack the cut pipes for subsequent packaging and transportation.

The above are the main devices commonly found in structural wall tube extrusion production lines. The specific production line configuration and combination may vary depending on production requirements and product characteristics.