Precautions for using plastic pipe coiling machine

When using a plastic pipe coiler, the following points should be noted:

Pre-operation inspection:

Ensure that all parts of the coiler are not damaged, especially cables, motors, transmission devices and operating buttons.

Check the quality and specifications of the plastic pipe to confirm the match with the coiler.

Clean the work area and ensure that there is no debris around the equipment to avoid hindering the normal operation of the machine.

During operation:

Before starting, ensure that all operators have received appropriate training and clear operating steps.

Strictly follow the operating procedures to avoid overloading the machine.

Adjust the appropriate speed to avoid too fast or too slow coiling speed to avoid affecting the neatness and quality of the plastic pipe.

Wear protective gloves and other personal protective equipment during operation to avoid contact with moving parts.

Maintain the stability of the machine during operation to prevent unnecessary vibration or deviation.

Maintenance and care:

Regularly check the lubrication system of the plastic pipe coiler to ensure that the moving parts are well lubricated.

Clean up plastic residues and dust inside the machine to avoid blockage and failure.

Regularly check the electrical system to ensure the safety of the line.

Record each inspection and maintenance to ensure the long-term stable operation of the equipment.

Emergency handling:

In case of failure or emergency, stop the machine immediately and conduct an investigation.

If there is a fire or electrical failure, cut off the power supply in time and take appropriate emergency measures.

Safety warning:

It is strictly forbidden to make any adjustments or maintenance operations while the machine is running.

Make sure there are no non-operating personnel around, especially avoid children near the machine.

By following these operating and safety precautions, the service life of the plastic pipe coiler can be effectively extended and the safety of the working environment can be ensured.